Set Face Picture Matting - HIKVISION iDS-TCV500-B(I)/IM User Manual

the overlaid number. E.g., the fixed digits for lane No. is 2. If the lane No. is 1, 01 will be
overlaid on the picture.
Overlay Plate Close-up
Check it to overlay license plate close-up pictures on the captured pictures.
Overlay OSD on Close-up Picture
Check it to overlay the OSD information on the close-up pictures.
4. Select the overlay information from the list.
Note
The overlay information varies with different models. The actual device prevails.
5. Set the overlay information.
Set Type
Set Overlay
Information
Set Overlay Position
Set Space
Set Line Break
Characters
Adjust overlay
sequence
6. Click Save.

3.2.5 Set Face Picture Matting

Set face picture matting first if you need to upload face and vehicle pictures to the platform.
Steps
Note
The function varies with different models. The actual device prevails.
1. Go to Configuration → Capture → Capture Parameters → Vehicle Feature → Face Picture
Matting.
2. Check Enable Face Picture Matting.
Tyre and Axle Recognition Unit User Manual
You can edit the type.
For some information types, you can edit the detailed information.
If you check it, the current information will be displayed from a new
line.
Edit the number of space between the current information and the
next one from 0 to 255. 0 means there is no space.
Edit the number of characters from 0 to 100 between the current
information line and the previous information line. 0 means no line
break.
Click / to adjust the display sequence of the overlay
information.
10