Table of Contents
Advertisement
The CSV Vehicle Passing Statistics Information will be uploaded to FTP server.
Upload Face Picture
Face pictures will be uploaded to FTP server.
5. Optional: Click FTP Test to check the FTP server.
6. Set naming rules and separators according to the actual needs.
7. Optional: Edit OSD information which can be uploaded to the FTP server with the pictures to
make it convenient to view and distinguish the data.
8. Click Save.
7.1.3 Set SDK Listening
The SDK listening can be used to receive the uploaded information and pictures of the device
arming alarm.
Before You Start
The listening service has been enabled for the SDK listening, and the network communication with
the device is normal.
Steps
1. Go to Configuration → Network → Data Connection → SDK Listening.
2. Check Enable SDK Listening.
3. Set IP Address/Domain and Port if you need to upload the alarm information and pictures.
4. Optional: Enable Enable Picture Uploading Listening if you need to upload image information.
5. Select Protocol Type.
Note
Supported functions vary with different models. The actual device prevails.
License Plate Upload Protocol
Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload images which are full of black or white pixel points. Enable Output Binary
Tyre and Axle Recognition Unit User Manual
Figure 7-3 Set SDK Listening
24
Advertisement
Table of Contents
