HIKVISION iDS-TCV500-B(I)/IM User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. iDS-TCV500-B(I)/IM
  6. User manual
HIKVISION iDS-TCV500-B(I)/IM User Manual

HIKVISION iDS-TCV500-B(I)/IM User Manual

Tyre and axle recognition unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Tyre and Axle Recognition Unit
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDS-TCV500-B(I)/IM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION iDS-TCV500-B(I)/IM

Summary of Contents for HIKVISION iDS-TCV500-B(I)/IM

  • Page 1 Tyre and Axle Recognition Unit User Manual...
  • Page 2 With the philosophy of "Technology for the Good", Hikvision requests that every end user of video technology and video products shall comply with all the applicable laws and regulations, as well as ethical customs, aiming to jointly create a better community.
  • Page 3 Tyre and Axle Recognition Unit User Manual ● Video products have made great contributions to the improvement of social security around the world, and we believe that these products will also play an active role in more aspects of social life.
  • Page 4 Tyre and Axle Recognition Unit User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...

  • Page 5: Table Of Contents

    Tyre and Axle Recognition Unit User Manual Contents Chapter 1 Product Introduction ....................1 1.1 Product Introduction ......................1 1.2 Product Features ........................1 Chapter 2 Activation and Login ....................2 2.1 Activation ..........................2 2.1.1 Default Information ....................2 2.1.2 Activate via SADP .......................
  • Page 6 Tyre and Axle Recognition Unit User Manual 5.1.4 Select Stream Type ....................16 5.1.5 Capture Picture Manually ..................16 5.1.6 Record Manually ...................... 17 5.1.7 Enable Digital Zoom ....................17 5.1.8 Select Video Mode ....................17 5.1.9 Enable Full Screen ....................17 5.1.10 BLC .........................
  • Page 7 Tyre and Axle Recognition Unit User Manual 9.6 Set 802.1 X .......................... 45 9.7 Set QoS ..........................45 Chapter 10 Serial Port Configuration ..................47 10.1 Set RS-485 ......................... 47 10.2 Set RS-232 ......................... 48 Chapter 11 Event and Alarm ..................... 49 11.1 Exception Alarm ........................
  • Page 8 Tyre and Axle Recognition Unit User Manual 13.8.1 Debug Device ......................59 13.8.2 Vehicle Capture and Recognition Service .............. 60 13.8.3 Set Image Format ....................61 13.9 Export Parameters ......................61 13.10 Import Configuration File ....................62 13.11 Export Debug File ......................62 13.12 Export Diagnosis Information ..................

  • Page 9: Chapter 1 Product Introduction

    Tyre and Axle Recognition Unit User Manual Chapter 1 Product Introduction 1.1 Product Introduction Tyre and Axle Recognition Unit (hereinafter referred to as device) has shield and high-definition camera. The device has high frame rate, good color reproduction and low illumination. The device adopts "deep learning"...

  • Page 10: Chapter 2 Activation And Login

    Before You Start ● Get the SADP software from the supplied disk or the official website (http://www.hikvision.com/), and install it according to the prompts. ● The device and the computer that runs the SADP tool should belong to the same network segment.

  • Page 11: Activate Via Web Browser

    Tyre and Axle Recognition Unit User Manual Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  • Page 12: Login

    Tyre and Axle Recognition Unit User Manual Steps 1. Change the IP address of your computer to the same network segment as the device. 2. Open the web browser, and enter the default IP address of the device to enter the activation interface.

  • Page 13: Chapter 3 Capture Configuration

    Tyre and Axle Recognition Unit User Manual Chapter 3 Capture Configuration 3.1 Set Smart Monitoring Capture The smart monitoring mode supports capturing motor vehicles, non-motor vehicles, and pedestrians via video triggering. Steps 1. Go to Configuration → Capture → Application Mode. 2.

  • Page 14: Set Capture Parameters

    Tyre and Axle Recognition Unit User Manual It is used to adjust stitching completeness. The larger the value is the more complete the image stitching will be. Lower Stitching Edges It is used to adjust the stitching targets amount and the default value is 50. Front View Detection Mode It is used to optimize the stitching image and the default value is 0.

  • Page 15: Set Supplement Light Parameters

    Tyre and Axle Recognition Unit User Manual 4. Click Save. 3.2.2 Set Supplement Light Parameters Supplement light can enhance the image stabilization and adjust the brightness and color temperature. Steps 1. Go to Configuration → Capture → Capture Parameters → Supplement Light Parameters. Figure 3-3 Set Supplement Light Parameters 2.

  • Page 16: Set Picture Composition

    Tyre and Axle Recognition Unit User Manual – Select Time Schedule when you want the supplement light to be enabled during a fixed time period. Set the start time and end time. – Select Environment Brightness when you want the supplement light to be controlled by detecting the surroundings brightness automatically.

  • Page 17: Set Information Overlay

    Tyre and Axle Recognition Unit User Manual Note Enabling composition and outputting close-up independently functions conflict with each other. You can only enable one. 6. Click Save. 3.2.4 Set Information Overlay If you want to overlay information on the captured single pictures, set capture overlay. Steps Note The supported parameters vary with different models.

  • Page 18: Set Face Picture Matting

    Tyre and Axle Recognition Unit User Manual the overlaid number. E.g., the fixed digits for lane No. is 2. If the lane No. is 1, 01 will be overlaid on the picture. Overlay Plate Close-up Check it to overlay license plate close-up pictures on the captured pictures. Overlay OSD on Close-up Picture Check it to overlay the OSD information on the close-up pictures.

  • Page 19: Set Vehicle Feature Parameters

    Tyre and Axle Recognition Unit User Manual Figure 3-6 Set Face Picture Matting 3. Check Face Picture Matting Object and Overlay Frame on Matting according to the actual needs. 4. Set other parameters. Face Close-up Picture Cutting Ratio The higher the level is, the higher the cutting ratio will be. Face Close-up Picture Ratio The higher the value is, the higher the zoom level will be.

  • Page 20: Set Image Encoding Parameters

    Tyre and Axle Recognition Unit User Manual 3.2.7 Set Image Encoding Parameters If the captured pictures are not clear, set the resolution of the captured pictures and the picture size. Steps 1. Go to Configuration → Capture → Capture Parameters → Image Encoding and Composition → Image Encoding.

  • Page 21: Chapter 4 View Traffic Statistics

    Tyre and Axle Recognition Unit User Manual Chapter 4 View Traffic Statistics 4.1 Search Picture You can search the captured pictures stored in the storage card and export the pictures you need. Before You Start Install the storage card, and ensure the storage status is normal. Steps 1.
  • Page 22 Tyre and Axle Recognition Unit User Manual Figure 4-1 Real-Time Picture 4. Optional: You can also do the following operations. ● Level 1 Arming can only connect one client or web. The uploaded pictures will not be stored in the storage card. The pictures in the storage card will be uploaded to the level 1 arming.

  • Page 23: View Real-Time Traffic Statistics

    Tyre and Axle Recognition Unit User Manual Display the images in full screen mode. Open Folder Open the saving path of captured pictures. 4.3 View Real-Time Traffic Statistics You can view the real-time traffic statistics if the device supports this function. Steps 1.

  • Page 24: Chapter 5 Live View And Local Configuration

    Tyre and Axle Recognition Unit User Manual Chapter 5 Live View and Local Configuration 5.1 Live View 5.1.1 Start/Stop Live View Click to start live view. Click to stop live view. 5.1.2 Select Live View Ratio Click to select live view ratio. 5.1.3 Select Window Division Mode Click to select a window division mode.

  • Page 25: Record Manually

    Tyre and Axle Recognition Unit User Manual 5.1.6 Record Manually You can record videos manually on the live view image and save them to the computer. Steps 1. Click to start live view. 2. Click to start recording. 3. Click to stop recording.

  • Page 26: Local Configuration

    Tyre and Axle Recognition Unit User Manual 4. Drag the mouse to draw an area. 5. Click Save. Result The drawn area will be exposed. 5.2 Local Configuration Go to Configuration → Local to set the live view parameters and change the saving paths of videos, captured pictures, scene pictures, etc.
  • Page 27 Tyre and Axle Recognition Unit User Manual Select the network transmission protocol according to the actual needs. Ensures complete delivery of streaming data and better video quality, yet the real-time transmission will be affected. Provides real-time audio and video streams. HTTP Gets streams from the device by a third party client.
  • Page 28 Tyre and Axle Recognition Unit User Manual Image Size The display ratio of live view. Image Format The saving format of manually captured images. Record File Size Select the packed size of the manually recorded video files. After the selection, the max. record file size is the value you selected.

  • Page 29: Chapter 6 Playback

    Tyre and Axle Recognition Unit User Manual Chapter 6 Playback You can search, play back, and download videos that stored on the storage card. Steps 1. Click Playback. 2. Select a channel. 3. Select a date. 4. Click Search. 5. Click to start playback.

  • Page 30: Chapter 7 Record And Capture

    Tyre and Axle Recognition Unit User Manual Chapter 7 Record and Capture 7.1 Set Storage Path 7.1.1 Set Storage Card If you want to store the files to the storage card, make sure you insert and format the storage card in advance.

  • Page 31: Set Ftp

    Tyre and Axle Recognition Unit User Manual 7.1.2 Set FTP Set FTP parameters if you want to upload the captured pictures to the FTP server. Before You Start Set the FTP server, and ensure the device can communicate normally with the server. Steps 1.

  • Page 32: Set Sdk Listening

    Tyre and Axle Recognition Unit User Manual The CSV Vehicle Passing Statistics Information will be uploaded to FTP server. Upload Face Picture Face pictures will be uploaded to FTP server. 5. Optional: Click FTP Test to check the FTP server. 6.

  • Page 33: Set Arm Host

    Tyre and Axle Recognition Unit User Manual Image in BMP Format if you want to output images in this format. Mixed Target Upload Protocol Uploads images of multiple targets such as humans and vehicles. You can enable the body property to recognize clothes, bags, and other properties. 5.

  • Page 34: Set Isapi Listening

    Tyre and Axle Recognition Unit User Manual Uploads images of multiple targets such as humans and vehicles. You can enable the body property to recognize clothes, bags, and other properties. 3. Optional: If you want to save the alarm information and pictures to the cloud storage, click to set Cloud Storage.

  • Page 35: Set Cloud Storage

    Tyre and Axle Recognition Unit User Manual Note Enable Output Binary Image in BMP Format if you want to output images in this format. 6. Optional: If you want to save the alarm information and pictures to the cloud storage, click to set Cloud Storage.

  • Page 36: Set Quota

    Tyre and Axle Recognition Unit User Manual V2.0 1. Enter IP Address and Port. 2. Enter accessKey and secretKey. 3. Enter Resource Pool ID according to the server storage area No. of uploading pictures. 4. Click Save. 7.2 Set Quota Set the video and picture ratio in the storage.

  • Page 37: Set Record Schedule

    Tyre and Axle Recognition Unit User Manual 7.3 Set Record Schedule Set record schedule to record video automatically during configured time periods. Before You Start Install the storage card. Steps 1. Go to Configuration → Storage → Schedule Settings → Record Schedule. 2.
  • Page 38 Tyre and Axle Recognition Unit User Manual Result The device will only record at the set periods.

  • Page 39: Chapter 8 Encoding And Display

    Tyre and Axle Recognition Unit User Manual Chapter 8 Encoding and Display 8.1 Set Video Encoding Parameters Set video encoding parameters to adjust the live view and recording effect. ● When the network signal is good and the speed is fast, you can set high resolution and bitrate to raise the image quality.

  • Page 40: Set Image Parameters

    Tyre and Axle Recognition Unit User Manual bandwidth requirement is higher. Scalable Video Coding (SVC) is an extension of the H.264/AVC and H.265 standard. Enable the function and the device will automatically extract frames from the original video when the network bandwidth is insufficient.
  • Page 41 Tyre and Axle Recognition Unit User Manual Figure 8-1 Set Image Parameters 2. Set the camera parameters. Note The supported parameters vary with different models. The actual device prevails. General Parameter Enable Dual-Shutter Set Stream Type after enabling it. Saturation It refers to the colorfulness of the image color.

  • Page 42: Set Roi

    Tyre and Axle Recognition Unit User Manual It refers to the contrast of the image. Set it to adjust the levels and permeability of the image. Shutter If the shutter speed is quick, the details of the moving objects can be displayed better. If the shutter speed is slow, the outline of the moving objects will be fuzzy and trailing will appear.

  • Page 43: Set Osd

    Tyre and Axle Recognition Unit User Manual Steps 1. Go to Configuration → Video → Video Encoding → ROI. Figure 8-2 Set ROI 2. Select Stream Type. 3. Set ROI region. 1) Check Enable. 2) Select Area Code. 3) Click Draw Area. 4) Drag the mouse on the live view image to draw a fixed area.

  • Page 44: Set Privacy Mask

    Tyre and Axle Recognition Unit User Manual Figure 8-3 Set OSD 2. Set display contents. 1) Check Camera Name. 2) Enter Camera Name. 3) Check Display Date, and set the time and date format. 4) Enable Display Week or Millisecond according to your needs. 3.
  • Page 45 Tyre and Axle Recognition Unit User Manual view or recording with a masked area. Steps 1. Go to Configuration → Video → Video Encoding → Privacy Mask. 2. Check Enable Privacy Mask. 3. Enable the privacy mask area(s). 1) Check Enable. 2) Select Area Code.

  • Page 46: Chapter 9 Network Configuration

    Tyre and Axle Recognition Unit User Manual Chapter 9 Network Configuration 9.1 Set IP Address IP address must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.
  • Page 47 Tyre and Axle Recognition Unit User Manual Figure 9-1 Set IP Address 2. Select Dual-NIC Mode. Dual-Network Backup Select it when the two network interfaces are connected to two network cables respectively. When one network interface fails, the other network interface will be employed automatically without influencing the data transmission.

  • Page 48: Connect To Isup Platform

    Tyre and Axle Recognition Unit User Manual Route Advertisement The IPv6 address is generated by combining the route advertisement and the device Mac address. Note Route advertisement mode requires the support from the router that the device is connected to. DHCP The IPv6 address is assigned by the server, router, or gateway.
  • Page 49 Tyre and Axle Recognition Unit User Manual Steps 1. Go to Configuration → Network → Data Connection → ISUP. Figure 9-2 Connect to ISUP Platform 2. Check Enable. 3. Select Protocol Version. 4. Select Address Type. 5. Enter Sever IP Address, Server Port, and Device ID. Note You need to enter Key if you select Protocol Version as v5.0.

  • Page 50: Set Ddns

    Tyre and Axle Recognition Unit User Manual 9.3 Set DDNS You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can be mapped to a domain name resolution server to realize the network access via domain name.

  • Page 51: Set Snmp

    Tyre and Axle Recognition Unit User Manual 9.4 Set SNMP You can set the SNMP network management protocol to get the alarm event and exception messages in network transmission. Before You Start Download the SNMP software and manage to receive the device information via SNMP port. Steps 1.
  • Page 52 Tyre and Axle Recognition Unit User Manual Figure 9-4 Set Port HTTP Port It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login. HTTPS Port Set the HTTPS for accessing the browser.

  • Page 53: Set 802.1 X

    Tyre and Axle Recognition Unit User Manual It refers to the port that adopts TLS protocol over the SDK service, to provide safer data transmission. Note ● After editing the port, access to the device via new port. ● Reboot the device to take the new settings into effect. ●...
  • Page 54 Tyre and Axle Recognition Unit User Manual Note Network can identify the priority of data transmission. The bigger the DSCP value is, the higher the priority is. Same settings need to be set in the router for configuration. 3. Click Save.

  • Page 55: Chapter 10 Serial Port Configuration

    Tyre and Axle Recognition Unit User Manual Chapter 10 Serial Port Configuration 10.1 Set RS-485 Set RS-485 parameters if the device needs to be connected to other peripheral devices controlled by RS-485 serial port. Before You Start The corresponding device has been connected via the RS-485 serial port. Steps Note The number of available RS-485 serial port varies with different models.

  • Page 56: Set Rs-232

    Tyre and Axle Recognition Unit User Manual 10.2 Set RS-232 Set RS-232 parameters if you need to debug the device via RS-232 serial port. Before You Start The debugging device has been connected via the RS-232 serial port. Steps 1. Go to Configuration → System → System Settings → Serial Port → RS-232. Figure 10-2 Set RS-232 2.

  • Page 57: Chapter 11 Event And Alarm

    Tyre and Axle Recognition Unit User Manual Chapter 11 Event and Alarm 11.1 Exception Alarm Set exception alarm when the network is disconnected, the IP address is conflicted, etc. Steps Note The supported exception types vary with different models. The actual device prevails. 1.
  • Page 58 Tyre and Axle Recognition Unit User Manual Figure 11-1 Set Email 3. Set email parameters. 1) Enter the sender's email information, including Sender, Sender's Address, SMTP Server, and SMTP Port. 2) Select Email Encryption. None Emails are sent without encryption. Emails are sent after being encrypted by TLS.
  • Page 59 Tyre and Axle Recognition Unit User Manual user. Before You Start The email has been enabled and related email parameters have been configured. Steps 1. Go to Configuration → Event → Alarm Linkage → Email Event. 2. Check Enable to trigger an email alarm. 3.

  • Page 60: Chapter 12 Safety Management

    Tyre and Axle Recognition Unit User Manual Chapter 12 Safety Management 12.1 Manage User The administrator can add, modify, or delete other accounts, and grant different permissions to different user levels. Steps 1. Go to Configuration → System → User Management → User List. 2.

  • Page 61: Set Ip Address Filtering

    Tyre and Axle Recognition Unit User Manual 12.2 Set IP Address Filtering You can set the IP addresses allowable and not allowable to access the device. Steps 1. Go to Configuration → System → Security → Security Settings. 2. Check Enable IP Address Filtering. 3.

  • Page 62: Install Authorized Certificate

    Tyre and Axle Recognition Unit User Manual which improves the security of remote access. Steps 1. Go to Configuration → Network → Network Parameters → HTTPS. 2. Select Create Self-signed Certificate. 3. Click Create. 4. Follow the prompt to enter Country/Region, Hostname/IP, Validity, and other parameters. 5.

  • Page 63: Set Rtsp Authentication

    Tyre and Axle Recognition Unit User Manual 12.6 Set RTSP Authentication You can improve network access security by setting RTSP authentication. Steps 1. Go to Configuration → System → Security → Security Settings. 2. Select RTSP Authentication. digest The device only supports digest authentication. digest/basic The device supports digest or basic authentication.

  • Page 64: Chapter 13 Maintenance

    Tyre and Axle Recognition Unit User Manual Chapter 13 Maintenance 13.1 View Device Information Basic Information and Algorithms Library Version Go to Configuration → System → System Settings → Basic Information to view the basic information and algorithms library version of the device. You can edit Device Name and Device No.

  • Page 65: Enable Log According To Module

    Tyre and Axle Recognition Unit User Manual 3. Click Search. The matched log files will be displayed on the log list. 4. Optional: Click Export to save the log files to your computer. 13.2.3 Enable Log According to Module You can enable the log according to the module for debugging. Steps Note The function varies with different models.

  • Page 66: Reboot

    Tyre and Axle Recognition Unit User Manual 13.4 Reboot When the device needs to be rebooted, reboot it via the software instead of cutting off the power directly. Steps 1. Go to Configuration → System → Maintenance → Upgrade & Maintenance → Device Maintenance.

  • Page 67: Set Dst

    Tyre and Axle Recognition Unit User Manual If the remote host has been set for the device, select it to synchronize time via the remote host. ONVIF Select it to synchronize time via the third-party device. Select it to disable time synchronization. Select it, and you can select any mode above.

  • Page 68: Vehicle Capture And Recognition Service

    Tyre and Axle Recognition Unit User Manual The algorithm POS information will be overlaid on the playback image when you play back the video with the dedicated tool. Enable Positioning Frame Debug The positioning frames of vehicle bodies and license plates will be overlaid on the captured pictures.

  • Page 69: Set Image Format

    Tyre and Axle Recognition Unit User Manual The reverse-driving vehicles will not be captured. For example, if you need to capture the vehicles driven from the west to the east, enable the function and the vehicles driven from the east to the west will not be captured. VCA Alarm for Target Picture Matting Check it to upload alarms via VCA protocol if the target picture matting is enabled.

  • Page 70: Import Configuration File

    Tyre and Axle Recognition Unit User Manual 13.10 Import Configuration File Import the configuration file of another device to the current device to set the same parameters. Before You Start Save the configuration file to the computer. Steps Caution Importing configuration file is only available to the devices of the same model and same version. 1.
  • Page 71 Tyre and Axle Recognition Unit User Manual 2. Click Export after Diagnosis Information. 3. Select the saving path, and enter the file name. 4. Click Save.
  • Page 72 UD34252B...

Table of Contents