Chapter 7 Record And Capture; Set Storage Path; Set Storage Card - HIKVISION iDS-TCV500-B(I)/IM User Manual

Tyre and axle recognition unit

Table of Contents

If you want to store the files to the storage card, make sure you insert and format the storage card

in advance.

Before You Start

Insert the storage card to the device.

Steps

1. Go to Configuration → Storage → Storage Management → HDD Management → HDD Storage.

2. Format the storage card in two ways.

– Check the storage card, and click Format to format it manually.

Note

For the newly installed storage card, you need to format it manually before using it normally.

– If you want to format the storage card automatically when the card is abnormal, enable Auto-

Initialize Redundant Storage.

Note

If you enable Auto-Initialize Redundant Storage, reboot the device to take the settings into

effect.

3. Optional: If the device has been connected to the platform, and you want to upload the storage

card information automatically, enable Auto-Upload Data in Redundant Storage.

4. Set Interval.

4. Click Save.

Tyre and Axle Recognition Unit User Manual

Chapter 7 Record and Capture

Figure 7-1 Set Storage Card

Table of Contents