Vehicle Capture And Recognition Service - HIKVISION iDS-TCV500-B(I)/IM User Manual

The algorithm POS information will be overlaid on the playback image when you play back
the video with the dedicated tool.
Enable Positioning Frame Debug
The positioning frames of vehicle bodies and license plates will be overlaid on the captured
pictures.
Enable Closed Positioning Frame
The bottom lines of the positioning frames on the captured pictures will display. The frames
will be closed.
Enable LPR Area Frame
The LPR area frames on the captured pictures will be displayed.
LPR Area Frame Y-Direction Deviation
If the license plate is not included in the LPR area frame, adjust the LPR area frame position in
the Y-direction by pixel. Enter the deviation pixel in the text field. The value = image height ×
(deviation distance/100). Set the value according to the actual needs. Range: -100% to 100%.
The LPR area frame moves up if the value is negative, and it moves down if the value is
positive.
Enable Multi-Way Upload
Data will be uploaded in multiple set ways simultaneously.
3. Click Save.

13.8.2 Vehicle Capture and Recognition Service

Set the vehicle capture and recognition service to debug the device.
Steps
1. Go to Configuration → Capture → Advanced → Vehicle Capture and Recognition Service.
2. Check the service according to your needs.
Filter Checkpoint Capture of Same Vehicle
It is used to debug the device with the same vehicle. When the same vehicle is triggered
many times during a short period in the scene, the checkpoint pictures of the vehicle will not
be captured.
Note
For some models, you can set Effective Time of Filtering.
Capture Frame Priority Mode
Check it to adopt license plate recognition results that processed by the single frame
recognition algorithm.
Do Not Capture Reverse-driving Vehicle
Tyre and Axle Recognition Unit User Manual
60