Table of Contents
Advertisement
3. Set email parameters.
1) Enter the sender's email information, including Sender, Sender's Address, SMTP Server, and
SMTP Port.
2) Select Email Encryption.
None
Emails are sent without encryption.
TLS
Emails are sent after being encrypted by TLS.
3) Optional: If you want to upload no-plate data, check Upload No-Plate Data.
4) Optional: If your email server requires authentication, check Authentication and enter your
user name and password to log in to the server.
5) Enter the receiver's information, including the receiver's name and address.
6) Optional: Click Test to see if the function is well configured.
4. Click Save.
11.3 Set Email Event
When the set event occurs, the device can be set to send an email with alarm information to the
Tyre and Axle Recognition Unit User Manual
Figure 11-1 Set Email
50
Advertisement
Table of Contents
