Set Osd - HIKVISION iDS-TCV500-B(I)/IM User Manual

Steps
1. Go to Configuration → Video → Video Encoding → ROI.
2. Select Stream Type.
3. Set ROI region.
1) Check Enable.
2) Select Area Code.
3) Click Draw Area.
4) Drag the mouse on the live view image to draw a fixed area.
5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position.
4. Select ROI Level and enter Area Name.
Note
The higher the ROI level is, the clearer the image of the detected area is.
5. Click Save.
6. Optional: Select other area codes and repeat the steps above if you need to draw multiple fixed
areas.

8.4 Set OSD

You can customize OSD information on the live view.
Steps
1. Go to Configuration → Video → Text Overlay on Video → Text Overlay on Video.
Note
The supported functions vary with different models. The actual device prevails.
Tyre and Axle Recognition Unit User Manual
Figure 8-2 Set ROI
35