Sungrow SG25CX-P2 User Manual page 97

User Manual
Parameter
Active power gradient
control
Active power decline
gradient
Active power rising
gradient
Active power setting
persistence
Active power limit
Active power limit ratio
Shutdown when active
power limit to 0%
Active Overload
Switch
Reactive Power Regulation
Tap "Settings→Power Regulation Parameters→Reactive Power Regulation" to enter
the screen, as shown in the following figure.
Definition/Setting
Description
Switch for enabling/disabling
the active power rate settable
function.
The decline rate of inverter ac-
tive power per minute.
The rise rate of inverter active
power per minute.
Switch for enabling/disabling
the function of saving output
limited power.
The switch for limiting output
power.
The ratio of limiting output
power to rated power in
percentage.
Switch used to determine
whether the inverter is in stop
state when the limited power
reaches 0.
Switch used to ensure that the
inverter operates at the maxi-
mum active power when PV
power limit ratio is set over
100%.
7 iSolarCloud App
Range
Enable/Disable
1%/min~6000%/min
1%/min~6000%/min
Enable/Disable
Enable/Disable
0%~110%
Enable/Disable
Enable/Disable
87