Led Indicator - Sungrow SG25CX-P2 User Manual

User Manual
Symbol
* The table shown here is for reference only. The actual product received may differ.
2.4

LED Indicator

The LED indicator on the front of the inverter indicates the working state of the inverter.
table 2-1 LED Indicator State Description
LED Color
Blue
Explanation
UKCA mark of conformity.
The inverter does not have a transformer.
Disconnect the inverter from all the external power sources be-
fore maintenance!
Burn danger due to the hot surface that may exceed 60°C.
Danger to life due to high voltages!
Do not touch live parts for 15 minutes after disconnection from
the power sources.
Only qualified personnel can open and maintain the inverter.
External grounding point.
State Definition
The device is connected to the grid and operating
On
normally.
Fast blink The Bluetooth connection is established, and there is
data communication.
(Period: 0.2s)
No system fault occurs.
Slow blink
The device is in standby or startup state (not feeding
(Period: 2s)
power into the grid).
Slow blink
once, fast
The inverter is performing PID recovery.
blink three
times
2 Product Description
11