Communication Connection; Wireless Communication Module Connection (Optional) - Sungrow SG25CX-P2 User Manual

User Manual
Step 8 Connect the PV connectors to corresponding terminals until there is an audible click.
Step 9 Follow the foregoing steps to connect PV connectors of other PV strings.
Step 10 Seal any unused PV terminal with a terminal cap.
- - End
5.8

Communication Connection

5.8.1 Wireless Communication Module Connection (optional)

Install the wireless communication module to the communication interface with a silk screen
of COM1 at the bottom of the inverter.
*The image shown here is for reference only. The actual product you receive may differ.
Once the communication module is in use, do not connect the inverter to a data
logger at the same time via RS485. Please contact SUNGROW for any further
queries.
For details on module installation and configuration, refer to the manual delivered
together with the module.
5 Electrical Connection
55