Quality Assurance - Sungrow SG25CX-P2 User Manual

10 Appendix
Number of
Inverter
20
21
22
23
24
25
In case the specification of the cable used is not included in the table above, when
there is only one inverter, ensure that the line impedance of the input node is less
than 300Ω; and when there are multiple inverters connected in the daisy chain, en-
sure that the impedance is less than 300Ω/number of inverter.

10.3 Quality Assurance

When product faults occur during the warranty period, SUNGROW will provide free service
or replace the product with a new one.
Evidence
During the warranty period, the customer shall provide the product purchase invoice and
date. In addition, the trademark on the product shall be undamaged and legible. Otherwise,
SUNGROW has the right to refuse to honor the quality guarantee.
Conditions
• After replacement, unqualified products shall be processed by SUNGROW.
• The customer shall give SUNGROW a reasonable period to repair the faulty device.
Exclusion of Liability
In the following circumstances, SUNGROW has the right to refuse to honor the quality
guarantee:
• The free warranty period for the whole machine/components has expired.
• The device is damaged during transport.
• The device is incorrectly installed, refitted, or used.
• The device operates in harsh conditions beyond those described in this manual.
• The fault or damage is caused by installation, repairs, modification, or disassembly per-
formed by a service provider or personnel not from SUNGROW.
138
Maximum Wiring Distance(unit:m)
16AWG / 1.31mm 2
652
620
592
567
543
521
17AWG / 1.026mm 2
528
502
480
459
440
422
User Manual