Table of Contents
Advertisement
4 Mechanical Mounting
•
Please ensure that the optimizer is installed facing the back of the module. Oth-
erwise, the clip may get damaged.
•
Do not forcibly bend the clips when installing the optimizer by clips. Otherwise,
the clip may be damaged.
•
Do not clamp the optimizer into holes in the module frame during installation.
Otherwise, the optimizer cannot be removed or the clips may be damaged.
•
It is recommended to install optimizers on the same side of modules.
•
Do not clamp and remove the optimizer multiple times. Otherwise, the clip may
become loose, affecting normal use.
- - End
32
User Manual
Hide quick links:
Advertisement
Table of Contents
