Pole Installation - Sungrow SG25CX-P2 User Manual

4 Mechanical Mounting
Step 3 Secure the mounting-bracket with expansion bolts.
- - End

4.5.3 Pole Installation

Tool preparation
Name
Marker
Level
Hammer drill*
Wrench
*Check if tools of other specifications are needed according to the bolts of the matching
clamps.
Material preparation
Name
Bolt
assembly
Bolt
assembly
Steel u-
channel
Clamp
Step 1 Erect and stabilize the pole at the installation site.
Please skip this step if the inverter is to be installed on a concrete pole, PV brack-
et, etc. through pole-mounting.
28
Specification
—
-
Bit: φ12
Inner diameter: 16mm
Quantity Specification
2 M10
4 M10
-
2
2 According to the
pole specification
Source
Included in the delivery scope
Not included in the delivery
scope
Not included in the delivery
scope
Not included in the delivery
scope
User Manual