Yamaha RX-V2600 Owner's Manual page 68

I_ll]llhT[e_'_e]lJ_Tlll_l_lllll:J_,y:y_,yi_l_ll_l:_
Press A / V repeatedly to select
Stereo/Surround and then press c>.
The follovdng display appears.
Press A / V repeatedly to select the sound
field program you want to adjust and then
press _>.
The follo'a, ing display appears.
5 Press EXIT on the remote control to exit.
You cannot change parameter values when Memory Guard is set
to On. If you want to change the parameter values, set Memory
Guard to Off (see page 98).
Memory back-up
The memory back-up circuit prevents the stored data
from being lost. However, the stored data will be lost
in case the power cord is disconnected from the AC
wall outlet for more than one week.
• Initializing sound field programs
To initialize each sound field program
individually
1 Repeat steps 1 to 3 to select the sound field
program you want to reset and then press _>.
2
Press _ / V repeatedly to select Initialize.
3 Press EXIT on the remote control to exit.
To initialize all sound field programs
Use the Sur.Initialize parameter in the Option menu
(see page 98).
Press A / V repeatedly to select the sound
field parameter you want to adjust and then
press c>.
See"SOUND FIELD PARAMETER
DESCRIPTIONS" on page 68 for detailed
descriptions of each sound field parameter.
64