Yamaha RX-V2600 Owner's Manual page 101

Zone2 Volume (Zone 2 volume)
Use to select how, tile volmne control will operate "a, i th
regard to the ZONE 2 OUTPUT jacks. When Zone2
Amplifier is set to "Internal", this feature is automatically
set to "Variable".
Choices: Fixed, Variable
Select "Fixed" to fix the ZONE 2 OUTPUT volume
level to a standard line level.
Select "Variable" to adjust the ZONE 2 OUTPUT
volume simultaneously using VOL +_ on the remote
control.
Zone3 Volume (Zone 3 volume)
Use to select ho'a, tile volume control will operate "a, i th
regard to the ZONE 3 OUTPUT jacks.
Choices: Fixed, Variable
Zone20SD (Zone 2 on-screen display)
Use this feature to display the operational status of Zone 2
as well as Zone 3 on the Zone 2 video monitor connected
to the ZONE 2 VIDEO jacks on the rear panel of this unit.
The Zone 2 and Zone 3 information to be displayed is
listed as follows:
• The input source of Zone 2 and Zone 3
• The volume level of Zone 2 and Zone 3
• The audio mute status of Zone 2 and Zone 3
• The tonal quality status of Zone 2 and Zone 3
• The XM Satellite Radio information when XM is
selected as the input source of Zone 2 and Zone 3
Choices: Off, Zone2, Zone2&Zone3
• Select "OFF' not to display any operational status of
Zone 2 and Zone 3 on the Zone 2 video monitor.
• Select "Zone2" to display the operational status of
Zone 2 only on the Zone 2 video monitor.
• Select "Zone2&Zoue3" to display the operational
status of Zone 2 and Zone 3 on the Zone 2 video
monitor.
Select "Fixed" to fix the ZONE 3 OUTPUT volume
level to a standard line level.
Select "Variable" to adjust the ZONE 3 OUTPUT
volume simultaneously using VOL +/- on the remote
control.
• If Zone2 OSD is set to Zoue2&Zone3. changes to the
operational status of Zone 3 is displayed on the Zone 2 vide()
monitor. For example, if the input source of Zone 3 is changed
while you are watching TV in Zone 2. the imme of the changed
input source of Zone 3 is displayed on your TV in Zone 2.
• If Zone20SD is set to Zoue2&Zone3. the display contents of
Zone 2 and Zone 3 depends on whether or not Zone 2 and Zone
3 are turned on with ZONE 2 ON/OFF and ZONE 3 ON/OFF
on the l?ont panel (see page 116).
If both Zone 2 and Zone 3 are turned on, the video signals of
the current input source of Zone 2 and the corresponding OSD
are displayed on the Zone 2 video monitor.
If Zone 2 is turned oil and Zone 3 is turned on, only the
corresponding OSD is displayed in the gray background
regardless of the REC OUT/ZONE 2 status on the front paneh
If Zone 2 is turned on and Zone 3 is turned off, the video
signals of the current input source of Zone 2 and the
corresponding OSD are displayed on the Zone 2 video
nloIlitor.
If both Zone 2 and Zone 3 are turned ofli no video signals and
no OSD are displayed on the Zone 2 video monitor.
97