Yamaha RX-V2600 Owner's Manual page 51

Automatic tuning is effective when station signals are
strong and there is no interference.
(U.S.A. model)
1 4323
Rotate the INPUT selector on the front panel
(or set AMP/SOURCE/TV to SOURCE and
then press TUNER on the remote control) to
select TUNER as the input source.
INPUT
Front panel
or
[ TUNER
Remote control
Press FM/AM on the front panel (or BAND on
the remote control) to select the reception
band.
FM or AM appears ill tile front panel display.
GUITOP
or
FMJAM
Dms _
Front panel
Remote control
or N i'i
Press TUNING MODE (AUTO/MAN'L)
repeatedly so that the AUTO indicator lights
up in the front panel display.
W_
"-,.. I /
[_" _ --
AUTO --
Lights up
Ifa colon (:) appears
in the front panel display, this
unit is in PRESET mode and tuning is not possible.
Press PRESET/TUNING (EDIT) to turn it off.
PRESETJ
TUNE_G
Preset station Frequency of
group and Reception the received
number band station
wu× DWN_2 V¢_ ¢BL_SAT DTV DW r_D/TAPE ¢D-n C_ _O_ _ ×{_
" • =="'i-_i ":=':": =" ..... _02_°
Name of the sound field program
Press PRESET/TUNING/CH <1 / _> once to
begin automatic tuning.
Press _ to tune into a higher frequency.
Press <1 to tune into a lower frequency.
When the unit is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
47