Yamaha RX-V2600 Owner's Manual page 38

l_lql,,Pb'ilq +
5 Press A / V repeatedly to select Wiring,
Distance, Size, Equalizing or Level and then
press _>.
For Equalizing, press A / V to select:
Ski[> To ski[> the selected itmn and perlbnn i_o
adjustments+
Check: Natural To average out the frequm_cy response of all
speakers with higher fi'equencies being less
emphasized. Recommended if the "Flat"
setting sounds a little harsh.
Check: Flat To average the frequency response of all
speakers. Recommended if all of your
speakers are of similar quality.
Check: Front To a_[just the frequency response of each
speaker in accordance with the sound of
your trout speakers. Recommmxled if your
front speakers are of much higher quality
than your other speakers.
Once you have selected the desired setting,
press <1 to move back to Setup Menu.
6 For Wiring, Distance, Size or Level, select:
Check To automatically check and at!just the selected
item.
Skip To skip the selected item and perlorm no
a@lstments.
When using THX speakers, select "Skip" lot Size and make
sure that "Small" or "Small x2" is selected in Speaker Set
(see page 90) and that "80Hz" is selected in Bass Cross
Over (see page 92).
8 Press V to select Setup Type and then select:
Auto
Step
To automatically pert%rm the entire
AUTO SETUP procedure.
To pause for confirmation between
each check in the AUTO SETUP
procedure.
34