Yamaha RX-V2600 Owner's Manual page 24

|'_'tflfl_ql['h'_
[_'-TIjIf[e]A'J
Do not connect this unit or other components to the main
power until all connections between components are
complete.
• Cable indications
For analog signals
lcl_ amdog cables _'_L£
right analog cables _.
For digital signals
optical cables ,_(o)
coaxial canes "Ill' c f,
For video signals
video cables
S-video cables ___.,cU g
For HDMI signals
• Analog jacks
You can input
analog signals
from audio components by
connecting audio pin cables to the analog jacks on this
unit. Connect red plugs to the right .jacks and white plugs
to the left jacks.
• Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can nse the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
signals input at the COAXIAL jack. All digital input jacks
are compatible with 96-kHz sampling digital signals.
This unit handles digital and analog signals independently. Thus
audio signals input at the analog jacks are only output at the
analog OUT (REC).jacks. Likewise. audio signals input at the
digital (OPTICAL or COAXIAL) jacks are only output at the
DIGITAL OUTPUT jacks.
2O