Yamaha RX-V2065 Firmware Update

October, 2010
Subject: RX-V2065 Firmware Update ver. 036.104.037
Yamaha is pleased to offer this firmware update to ensure the best possible
performance for your Yamaha RX-V2065 AV Receiver.
This firmware improves network connectivity.
The following pages contain the firmware update instructions for RX-V2065. You can
easily update to the latest firmware by either using an USB thumb drive or through
internet. In order to properly execute the update, read all instructions carefully. The
following links will also lead you directly to the beginning of each individual section of
the instructions.
Click here to confirm your current firmware version.
Click here to firmware update by USB. (USB thumb drive required)
Update by Network is recommended if your receiver is connected to the internet.
Click here to firmware update by Network. (Internet connection required)
Click here to confirm updated firmware version
Click here for troubleshooting.
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.
Firmware Update Procedure for RX-V2065
Page.1 of 7