Yamaha RX-V2600 Owner's Manual page 47

• Using the sleep timer
Use this feature to automatically set this nnit in tile
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLETS.
1 Select an input source and start playback on
the source component.
2
Press SLEEP on the remote control
repeatedly to set the amount of time.
SLEEP
%
Each time yon press SLEEP, the front panel display
changes as shown below.
The SLEEP indicator flashes while switching the
amount of time for the sleep timer.
vAtl× Dwme_2 vca_ C_L_'_AT DTV DVD _aO_APS CD-_ _ P_O_O mHE_ Xf_
_ _ ", _"_' i"" j ...' i :.'i p '_;i D -_C2
The SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound
field program.
VAU× DVR/VC_2 VCRI CBLf,¢AT DTV DVD NO_APg _D.R _ PHONO TLINg_ X_
_.._ _ __""v ,-. -q2,2
" .iii_. . P'_ i... _i? P'_ P'_ ii[_
3
Press SLEEP repeatedly so that SLEEP OFF
appears in the front panel display.
SLEEP
%
¢
¢" _ r" r" r': ¢': r" r' _ _a_
_ _ ,D L., C, C, !" LJ !" !" _°_"_ ," I
After a few seconds, SLEEP OFF disappears, and the
SLEEP indicator turns off.
-#-
The
sleep timer setting can also be canceled by pressing
STANDBY GRthe remote control (or MAIN ZONE ON/OFF on
the l?'ont panel) to set this unit. Zone 2 and Zone 3 to the standby
mode.
i/_ltF_lql
• Downmixing to 2 channels
You can enjoy 2-channel stereo playback from nmlti-
channel sources.
Rotate the PROGRAM selector (or set
AMP/SOURCE/TV to AMP and then press
STEREO on the remote control) to select 2ch
Stereo.
2ch Stereo appears in the front panel display.
PROGRA_
O
Front panel
Remote control
.=:LL,= i' i 2) i,,_l:::*i' ' l:::_LJ
You can use a subwoGfer with this program when SWFR GrBoth
is selected in Bass Out (see page 92).
• Listening to unprocessed input signals
When the unit is in the STRAIGHT mode, 2-channel
stereo sources are output only from the front L/R speakers.
Multi-channel sources are decoded straightly into the
appropriate channels without any additional effect
processing.
Press STRAIGHT (EFFECT) on the front
panel or on the remote control to select
STRAIGHT.
STRAIGHT appears in the front panel display.
STRAIGHT
/_-=%
_ECT
Front panel
or
STRAIGHT
Remote control
==_ ==== i_= ==== _= ====i i=_
"3 iK H ,i, t'_Vii
43