Yamaha RX-V2600 Owner's Manual page 11

@ Front panel display
Sho'a,s information about tile operational status of this
unit.
@ PRESET/TUNING (EDIT)
Switches tile function of PRESET/TUNING/CH <1/C>
between selecting preset station numbers and tuning when
TUNER is selected as the input source (see pages 47 to
52).
@ FM/AM
Switches tile reception band (FM or AM) when TUNER is
selected as the input source (see page 47).
The frequm/cy of the previously received station is automatically
recalled.
@
MEMORY (MAR'L/AUTO FM)
Stores a station in the memory when TUNER is selected
as the input source. HoLt down for more than 3 seconds to
start automatic preset tuning (see page 48).
@
TUNING MODE (AUTO/MAR'L), DISPLAY
Switches the tuning mode between automatic (the AUTO
indicator is turned on) and mannal (the AUTO indicator is
turned oft') when TUNER is selected as the input source.
STRAIGHT (EFFECT)
Turns the sound field programs on or oft'. When
STRAIGHT is selected, 2-channel or multi-channel input
signals are output directly from the respective speakers
without effect processing.
@ Remote control sensor
Receives infrared signals from the remote controh
@ TONE CONTROL
Use to adjust tile balance of bass and treble for the front
left and right and center channels (see page 39).
_ PURE DIRECT
Turns on or off the PURE DIRECT mode (see page 42).
The indicator around the button lights up when the unit is in the
PURE DIRECT mode.
@ REC OUT/ZONE 2
Selects the input source you "a, a nt to direct to the audio/
video recorder and Zone 2 outputs independently of the
input source you are listening to or watching in the main
room. When set to the SOURCE/REMOTE position, the
input source is directed to all outputs.
The Zone 2 output is always identical with the input source you
record.
e.leldll;[el_.'JF_qdlel_#ld[e.*J#[eldg
@ OPTIMIZER MIC jack
Use to connect the supplied optimizer microphone to run
AUTO SETUP (see page 32).
@
SPEAKERS
MB
Turn on or off the set of front speakers connected to the
SPEAKERS A and/or B terminals on the rear panel each
time the corresponding button is pressed.
@
(-_ PHONES (SILENT CINEMA) jack
Ol.ltputs audio siguals for private listeniilg with
headphones.
• When you connect headphones, no signals arc output at the
PRE OUT jacks or to the speakers.
• All Dolby Digital and DTS audio signals are mixed down to 2-
channel stere() (front left and right channels).
@ VIDEO AUX jacks
Input audio and video signals from an external source such
as a game console. To reproduce source signals at these
jacks, select V-AUX as the input source.
@ MULTI ZONE buttons
ZONE 2 ON/OFF
Turns on Zone 2 only or sets it to the standby mode.
See page 30 t_r details.
This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
ZONE 3 ON/OFF
Turns on Zone 3 only or sets it to tile standby mode.
See page 30 for details.
This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.
ZONE CONTROL
Switches tile zone you "a,:tnt to control between the
main unit, Zone 2 and Zone 3 (see page 117).
After you press ZONE CONTROL, the indicator for
the currently selected zone flashes in the front panel
display for approximately 5 seconds. While the
indicator is flashing, perform the desired operation.
@
PROGRAM selector
Use to select sound field programs or adjust the balance of
bass and treble in conjunction with TONE CONTROL.
@ VOLUME
Controls tile volume level of :tll audio channels.
This does not affect the OUT (REC) level.