Yamaha RX-V2600 Owner's Manual page 118

|:/:li_[o]l:lgo]_TIl:{o]ll=:Y__|ll]:l-'_"
• Clearing a macro function
You can clear the function progr:mnned for a certain
macro button.
Set AMP/SOURCE/TV to AMP or SOURCE.
Press MACRO using a ballpoint pen or
similar object.
"MCR '."' appears in tile display "a, i ndow.
iiJVoteiii!i!i
If you do not complete each of the lollowing steps within 30
seconds, the macro programming mode will be
automatically canceled. In this case, press MACRO again.
Press and hold CLEAR using a ballpoint pen
or similar object and then press the macro
button you want to clear for about 3 seconds.
(.';OK appears in the display windo'a, it"clearing was
successful.
(U.S.A. model)
• If you continuously want to clear another function, repeat
step 3.
• Once you clear a programmed hmction, the button reverts
to the lactory setting (or to the manufacturer setting if you
have set remote control codes).
Press CLEAR to exit the clearing mode.
The remote control returns to the macro
programming mode.
5 Press MACRO again to exit.
• C:NG appears in the display window if clearing was
unsuccessfuh In this case, start over from step 3.
• ERROR appears in the display window if you press a button not
indicated in the respective step, or if you press more than one
button simultaneously.
114