Yamaha RX-V2600 Owner's Manual page 53

Press and hold MEMORY (MAN'L/AUTO FM)
on the front panel for more than 3 seconds.
Tile preset group and number as "a.ell as tile
MEMORY and AUTO indicators flash. Alter
approximately 5 seconds, automatic presetting starts
from the currently selected frequency and proceeds
toward the higher frequencies.
MgMO'ay
VAU× DWNC_2 VC_ CaLl.AT DTV DVD MO_APE e_-n eD PHONO _ ×Pa_
,., ::5;__' i'i ::5_" ,_:i? i'i !"iZ =c/c'_ . .....
t
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
• Any station data stored under a preset station number is cleared
when you store a new station under the same preset station
number.
• If the preset number of the received stations does not reach 40
(E8), automatic preset tuning automatically stops alter
programming all axailable stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in "Manual preset
tuning".
• Customized automatic preset tuning
You can specify a preset station group and a preset station
number from which this unit stores the FM stations
received by automatic preset tuning.
1 Repeat steps 1 and 2 in "Automatic tuning".
2
Press A/B/C/D/E and then PRESET/TUNING/
CH <1 / C> on the front panel to select the
preset station group and the preset station
number where the first received station will
be stored.
For example, if you select C5, the first received
station is automatically programmed to C5 and the
next received stations are sequentially programmed to
C6, C7, etc.
Ara/C_O/E
Automatic preset tcmiug stops when the received stations have all
been stored up to E8.
Memory back-up
Tile memory back-up circuit prevents the stored data
from being lost. However, the stored data will be lost
in case the power cord is disconnected from the AC
wall outlet for more than one week.
49