Yamaha RX-V2600 Owner's Manual page 49

• Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1 Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
Tile top display appears.
_ GU_TOp
Press V repeatedly to select Signal Info. and
then press _>.
Press <1 / E> repeatedly to select Audio Info.
or Video Info..
Tile following information appears.
Audio Info. (Audio information)
Format
Signal format display. When the unit cannot detect a
digital signal, it automatically switches to analog
input.
Sampling
Sampling frequency. When the unit is unable to
detect the sampling frequency "?" appears.
Channel
Nnmber of source channels in the input signal. For
example, a multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is displayed
as "3/2/0.1 ".
Bitrate
Bit rate. When the unit is unable to detect the bit rate
"---" appears.
Dialogue
Dialogue normalization information for Dolby
Digital and DTS signals.
Flagl/Flag2
Flag data encoded in Dolby Digital, DTS and PCM
signals that cue this unit to automatically swdtch
decoders.
Video Info. (Video information)
HDMI Signal
Type of the HDMI signals input or output at the
HDMI IN/OUT jacks of this unit.
HDMI Resolution
Resolution of the HDMI signals input or output at the
HDMI IN/OUT jacks of this unit.
Analog Resolution
Resolution of the analog signals input or output at the
video component jacks of this unit.
4
Press EXIT on the remote control to exit.
45