Yamaha RX-V2600 Owner's Manual page 117

{l_,l_[I, ll:J[I,[I]_lll:[I]ll._2"__flll]:l._
Release the object used to press CLEAR to
exit from the clearing mode.
'El 17V I'_= _ %_
• C:NG appears in the display window if clearing wits
unsuccesslul. In this case start over from step 3.
• ERROR appears in the display window if you press a button not
indicated in the respective step, or if you press more than one
button simultaneously.
• Clearing a learned function
You can clear the function learned for :t certain button in
each control area.
Set AMP/SOURCE/TV to SOURCE.
Press an input selector button to select the
source component containing the function
you want to clear.
Tile selected component name appears in the display
'_,indow.
(U.S.A. model)
Press and hold CLEAR using a ballpoint pen
or similar object and then press the button
you want to clear for about 3 seconds.
(.';OK appears ill tile disphty window if clearing '_,as
successful.
(U.S.A. model)
• If you continuously want to clear another function, repeat
step 4.
• If you continuously want to clear another fimction lbr
another componenh press SELECT A / V to select the
component and then repeat step 4.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you haxe
set remote control codes).
Release the object used to press CLEAR to
exit the clearing mode.
Tile remote control returns to the learning mode.
Press LEARN again to exit.
• C:NG appears in the display window if clearing was
unsuccessl_ll. In this case, start over from step 4.
• ERROR appears in the display window if you press a button not
indicated in the respective step, or if you press more than one
button simultaneously.
Press LEARN using a ballpoint pen or similar
object.
LEARN and the selected component name
(ex. DVD) appear alternately ill tile disphty w,'indow.
ii:i
- 1
:5 F!I:_ !!
Iii iiii
• Do not press and hold LEARN. If you hold it down lkw
more than 3 secollds, the remote control enters the renlote
control code setting mode.
• If you do not complete each of the lk_llowing steps within
30 seconds, the learning mode will be automatically
canceled. In this case, press LEARN again.
113