Yamaha RX-V2600 Owner's Manual page 124

|ilotj_
• Assigning HDMI components
You can assign an HDMI component to tile HDMI IN 1 or
HDMI IN 2jack on the rear panel of this unit so that the
audio and video signals input via HDMI connection can
be simultaneously played back.
Use the I/O Assignment parameter in Input Select to
assign HDM] components (see page 81).
• Converting analog video signals to
HDMI
This unit is equipped v,,ith the HDMI up-conversion
feature where the analog video signals input at the
composite video, S-video and component video jacks on
the rear panel of this unit are digitally processed and up-
converted so that they can be outpnt at the HDMI OUT
jack on the rear panel of this unit with all-digital
resolution quality.
Use the HDMI Up-Scaling parameter in the Option menu
to convert analog component video signals to HDMI
(see page 88).
Perform the following steps to listen to playback from an
registered HDMI component.
If an error message appears ill the lronl panel display,
see page 127 for a complete list of error messages and proper
remedies.
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the input source
assigned to the HDMI IN 1 or HDMI IN 2 jack
on the rear panel of this unit.
(U.S.A. model)
or
When the analog video signals with 1080i or 720p of resolution
are up-converted to HDMI and output at the HDMI OUT jack. the
picture quality may xx.'orsen.
• Setting the HDMI support audio
You can choose to play back HDMI audio signals on this
unit or on another HDMI component connected to the
HDMI OUT jack on the rear panel of this unit.
Use the HDMI Set parameter in the Option menu to set the
HDMI support audio (see page 99).
Front panel Remote control
Press AUDIO SELECT on the front panel or
AUDIO SEL on the remote control repeatedly
to select AUTO or HDMI as the input mode.
Tile following front panel disphtys are examples
where DVD is selected as the input source.
auo_ S_UEeT _01_Et
%
Front panel Remote control
3 Start playback on the connected HDMI
component.
120