Yamaha RX-V2600 Owner's Manual page 104

IFi'bTl={l_|q_lP]f#
• To load settings
1 Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
The top disphty appears.
2
Press A / V on the remote control repeatedly
to select System Memory and then press _>.
3 Select Load and then press ENTER.
This feature allows you to select the language of your
choice that appears in the GUI (graphical user interface)
menu of this unit.
Choices: English (English), Et_N (Japanese),
FrancTais(French), Deutsch (German),
Espafiol (Spanish)
"4:--
Youcan also select the GUI language using the LANG. parameter
in ADVANCED SETUP in the front panel display (see page 102).
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
The top display appears.
_ _UlTOP
Press A / V on the remote control repeatedly
to select the memory number you want to
load and then press _>.
"Load: ENTER" appears in the bottom right comer of
the window.
5 Press ENTER to load settings.
Memory l and Memory 2
settings can
be recalled
simply
by
pressing MEMORY 1/2 on the remote control.
When yotl press MEMORY 1, the message "Load Memory 17
g Sg ir
Ye Pre Ae_in appe s he f ) panel display. Press
MEMORY I once more Io recall lhe sellings.
i IaEMOR¥
When you press MEMORY 2. the message "Load Memory 2<?
Yes:Press Again" appears in the ffonl
panel
display. Press
MEMORY 2 once more Io recall lhe sellings.
2
Press A / V on the remote control repeatedly
to select Language and then press _>.
3 Press/_ / V on the remote control repeatedly
to select the language of your choice.
4
Press ENTER to confirm your selection.
lO0