Rational iCombi Pro Original Instructions For Use page 60

5 | Intelligent cooking - iCookingSuite
>
A window appears, where you can set the core temperature.
6. Select the desired core temperature.
>>
The amount you set will be applied automatically within a few seconds.
Repeat this step as often as necessary until all pieces of food have reached the
desired core temperature.
New batch
Use this option to load another batch into the unit and resume the same cooking
path with the defined cooking parameters.
You will be prompted to unload the cooking system first and then load it again.
Once you have loaded a new batch into the cooking system and closed the
cooking cabinet door, the cooking path will resume.
Continue with time
Use this option to continue the cooking path for a specific amount of time. If you
select the option at the end of the cooking path, a window appears where you
can set the duration with which the cooking path is to be continued.
1. Select the desired time.
>>
The amount you set will be applied automatically within a few seconds.
If you switch from the cockpit back to the cooking parameters, the overview is
grayed out. That cooking parameter cannot be changed. Once the set time has
elapsed, you can either unload the unit or continue the cooking path with an
option.
Brown and crisp
Use this option to brown the outside of the food, creating a crisp, delicious crust.
When preparing mixed loads, remove the food you do not want to brown from
the cooking cabinet before starting the Crisp option.
If melted fat has collected in the cooking container, transfer the food to a
different container before starting the Crisp option, in order to prevent smoke
from developing during browning
After the browning finishes, if the food is not as brown and crisp as you would
like, select Time Continued and then set how much longer you would like the
food to continue browning.
Medium-rare meat is not well-suited to crisping - the high temperature would
turn the edges gray.
1. To adjust the parameters of the option Crisp, press the button:
2. Adjust the parameters as desired.
60 / 188 Original instructions for use