Connecting Units To A Network; Establish Wlan Connection - Rational iCombi Pro Original Instructions For Use

15 | Kitchen management
3. Next to Transfer HACCP data automatically, press the button:
>>
Now HACCP data will be transmitted automatically upon completion of each
cooking path. You can view that data on connectedcooking.com or through
the ConnectedCooking app.
15.2

Connecting units to a network

The following options are available when you network your unit:
Operate both units of a Combi-Duo installation on just one unit.
n
Connect the units with ConnectedCooking.
n
If you would like to network units of a Combi-Duo installation, please contact
your RATIONAL service partner.
15.2.1

Establish WLAN connection

Connecting the unit to a wireless network that requires you to log in via a
website will not allow the unit to establish a wireless connection.
1. Press this button:
2. Press this button:
3. To activate the function, press this button:
4. Press this button:
>
A list of all available wireless networks is shown. Wireless networks will be
shown in descending order of signal strength.
5. Select the wireless network you wish to use.
>
You will be prompted to enter the password for the wireless network.
6. To confirm, press this button:
>
Once the connection has been established successfully, the following symbol
appears in the footer:
>
The wireless network will be displayed at the top of the list of available
wireless networks.
7. To view connection details, click this button beside the wireless network: V
8. To disconnect from the network, go to the connection details and press this
button: Disconnect
9. Tap
>>
The name of the wireless network will be displayed in the Wireless network
section.
134 / 188
Network
WiFi
in the icon bar to return to the network settings overview screen.
ON
Original instructions for use
ON