Cleaning Accessories; Cleaning The Drain Ventilation Pipe - Rational iCombi Pro Original Instructions For Use

18 | Care
2. Clean the selection dial and the surface underneath it using a soft cloth.
3. Reattach the selection dial.
If your cooking system is equipped with a lockable control panel, the lockable
control panel must be unlocked and the cover opened before cleaning the control
panel.
You can lock the display before cleaning it. in order to keep from accidentally
starting cooking paths, taking action or accessing functions.
1. Press and hold this button:
>
After a few seconds, the display lock will activate and this symbol will be
shown:
2. Clean the display using a soft cloth.
3. To unlock the display, press and hold this button:
>
The display will show this symbol:
4. Remove the selection dial by hand, without using tools. Lift straight up.
5. Clean the selection dial and the surface underneath it using a soft cloth.
6. Reattach the selection dial.
18.9

Cleaning accessories

Do not leave accessories in the cooking system during automatic cleaning.
Never leave accessories in the cooking system during automatic cleaning. This
can damage the cooking system or the accessories.
1. Allow accessories to cool before cleaning them.
2. Use a soft cloth to remove any traces of food and grease, starch or protein
residues.
3. If the stains do not come out easily, soak the accessory in lukewarm water
and then use a soft cloth to wipe them clean.
18.10

Cleaning the drain ventilation pipe

If your cooking system was connected to a pre-existing siphon at the time of
installation, a ventilation pipe was installed on the drain. If your water is soft or
the cooking system is connected to a water softening system, and if you
frequently use medium and strong cleaning programs, the foam generated
during cleaning will be drained into the ventilation pipe. Clean the ventilation pipe
once per week in order to ensure that foam can drain properly.
160 / 188
NOTE
Original instructions for use