Rational iCombi Pro Original Instructions For Use page 123

Start Network Wizard
The Network Wizard helps you set up the network settings.
1. Press this button:
>
You will then be asked whether you want assistance with network settings.
The Wizard can help you set up either a wireless connection or a LAN
connection.
2. Press this button:
network settings:
IP address
n
IP gateway
n
IP subnetmask
n
DNS 1
n
MAC address
n
1. Press this button:
network settings:
MAC address
n
You can run network diagnostics to help troubleshoot connection issues.
1. Press this button:
system is connected to the network.
Original instructions for use
: Start Network Wizard
DHCP active: OFF will allow you to edit the following
DHCP active: ON will allow you to edit the following
Perform network diagnostics to see if your cooking
14 | Settings
123 / 188