Software Update Info; Installed Software Version; Connectedcooking - Rational iCombi Pro Original Instructions For Use

14 | Settings
Open source licenses
n
14.12.

Software update info

1
Here, you can see which software version is installed on your unit. If you have
connected your unit with ConnectedCooking and activated the function
Download software updates automatically, the software updates are made
available automatically. More information is available here: Run software updates
automatically [} 138] If a software update is available, the current software
version is shown and the Start installation button is active.
1. Press this button: Start installation
>>
The software update is carried out and the unit is rebooted.
14.12.

Installed software version

2
Here, you will find all information on the installed software version and installed
help packages.
14.13

ConnectedCooking

If no activation code is displayed, it is not yet possible to connect to the
ConnectedCooking server.
Check the following:
• DNS name resolution for www.connectedcooking.com.
• Variant with DHCP: DHCP active – network-assigned IP address.
• Version without DHCP: network operator must provide IP address, network
mask, gateway, DNS server - can then be entered manually on the cooking
system.
• Firewall ports 443 and 8883 free (protocol: HTTPS and MQTT) for outgoing
communication to destination host: www.connectedcooking.com (IP
185.113.124.8)
• Networks with MAC filter: MAC addresses can be read out on the combi-
steamer or requested via customer service *These settings correspond to the
default settings of a home router
1. Press this button:
2. Press this button:
To learn how to connect your cooking system to ConnectedCooking and discover
the available functions, go here: ConnectedCooking [} 136]
130 / 188
.
NOTE
ConnectedCooking
Original instructions for use