Rational iCombi Pro Electric Modification Instruction

Modification Instruction
MI_2313: Carrying out the "Reset to Factory" step _ V02
iCombi Pro Electric/Gas, iVario and iHexagon
Standard
1 MI_2313: Carrying out the "Reset to Factory" step _ V02
Topic
The information describes how to carry out step Reset to Factory".
Affected product/accessories
iCombi Pro Electric / Gas
6-1/1
n
6-2/1
n
10-1/1
n
10-2/1
n
20-1/1
n
20-2/1
n
iCombi Pro Electric
6-2/3
n
iVario
iHexagon
Required tool
USB stick with the "Reset to Factory" file
n
USB stick with the latest software
n
USB stick with the "Recovery.json" file
n
General information
NOTICE! Due to different software releases, the procedure may differ minim-
ally. These are specified in the software release notes.
Target group
This document is intended for skilled technicians, who have been certified
n
by the manufacturer after attending training and safety instructions.
Installation, inspection, maintenance, and repair work must only be carried
n
out by trained technicians.
It is recommended that only technicians authorised by the manufacturer
n
perform inspection, maintenance and repair work.
The unit may not be used, cleaned, or maintained by children. The unit may
n
not be used for play. This is prohibited even under supervision.
2023 / 13
30 min.
16.09.2024
1 / 8