Starting Automatic Cleaning - Rational iCombi Pro Original Instructions For Use

16 | Automatic cleaning - iCareSystem (chemical storage)
3. Open the cleaning hatch NOTE! Do not set anything that weighs more than 7
kg atop the open cleaning hatch!. Cartridge status is displayed automatically.
4. Pull empty cartridges out of the slot via the recessed grips.
5. Unpack the Active Green cleaner cartridges or Care cleaner cartridges,
remove the cap and place the cartridge into an empty slot in the chemical
storage system. You can decide for yourself how many cleaner cartridges you
want to use. However, we recommend using two Care cleaner cartridges and
two Active Green cleaner cartridges.
6. You will be asked if you have inserted a new cleaner cartridge.
7. Close the cleaning hatch.
8. Press:
9. Close the cooking cabinet door.
16.6

Starting automatic cleaning

Remaining cleaning time
Save current settings as
program
a
The hinging racks are correctly placed in the cooking cabinet.
a
Make sure the mobile rack is placed correctly within the cooking cabinet.
a
If your cooking system is equipped with an optional integrated fat drain,
remove the drip pan from the cooking cabinet and close the drain pipe.
1. In the menu bar, press this button:
>
If the cooking cabinet temperature is above 165 °F, this message will be
displayed: Cooking cabinet too hot
2. Select the desired cleaning program [} 148].
3. You now have the option of adjusting cleaning chemical quantities, selecting
whether the cooking system should be switched off after cleaning, and
pressing the programming button.
144 / 188
to confirm that you have inserted full cleaner cartridges.
Cleaning instructions and program status
Adjust cleaner quantity
Adjust care-chemical
quantity
Switch off after cleaning
Original instructions for use