22 | Transport
Units and Combi-Duos on castors can tip over when being transported or
moved
If your unit or Combi-Duo is on castors or a stand with castors, failing to
release the locking brake before transporting or shifting the unit or Combi-
Duo can cause it to tip over and injure you.
1. Always release the locking brake on the castors before transporting or
shifting the unit or Combi-Duo.
2. After transport, lock the locking brake on the castors again.
Ask your service partner to transport your cooking system in order to
guarantee proper operation.
You can move cooking systems that are on mobile stands or casters.
a
The steam generator is emptied and the cleaning box is pumped out. Both of
these may only be done by a service partner.
1. Before transporting the cooking system to a different location, you will need
to disconnect it properly from all water, wastewater, and power supply lines.
2. After moving the cooking system to its new location, make sure to reconnect
it properly to power, water and wastewater lines, and activate the locking
brakes on the mobile stand or the casters.
3. If you want to pull the cooking system out while cleaning the kitchen, release
the locking brakes on the mobile stand or the casters,
4. and then carefully pull the cooking system forward.
5. Once you are finished cleaning the kitchen, push the cooking system carefully
back into position and activate the locking brakes.
180 / 188
CAUTION
NOTE
Original instructions for use
Need help?
Do you have a question about the iCombi Pro and is the answer not in the manual?