Working With The Unit; Initial Start-Up; Switching The Unit On And Off - Rational iCombi Pro Original Instructions For Use

4 | Working with the unit

4 Working with the unit
4.1

Initial start-up

When you start your unit for the first time, it will have already been properly
installed by a RATIONAL Service Partner, The self-test will have been completed,
so the unit will be ready for use. Information related to installation is available in
the installation manual included in delivery.
Before working with the unit for the first time
1. Clean the unit and all accessories before initial use.
More information is available here: Care [} 154]
4.2

Switching the unit on and off

Switching the cooking system on
1. To switch the cooking system on, press and hold this button until the LED
lights up green:
>
The cooking system will power on. The home screen [} 21] will appear.
Operation without water supply
Continuous operation without water is not possible.
When operating the cooking system without connecting it to a water supply, you
will be prompted to pour 3 liters of water into the cooking cabinet. This symbol
will appear in the footer:
possible under the following conditions:
1. Pour 3 liters of water into the bottom of the cooking cabinet.
2. To confirm, press this button:
3. After max. 5 hours of cooking system operation, cool it down to < 100°C.
4. Then pour another 3 liters of water into the cooking cabinet.
5. As soon as water is available again, start cleaning.
20 / 188
. Temporary operation without a water supply is
Original instructions for use