Installing The Hood Latch - Toro Reelmaster 3100-D Operator's Manual

Installing the Hood Latch

12
CE Machines
Parts Required
1
2
1
1
1
1. Unhook the hood latch from the hood-latch bracket.
2. Remove the 2 rivets
bracket
3. While aligning the mounting holes, position the
CE latch bracket
onto the hood.
Note:
hood.
Do not remove the bolt and nut assembly
from the latch-bracket arm.
4. Align the washers with the holes on the inside
of the hood.
5. Rivet the brackets and the washers to the hood.
6. Hook the latch
3466-297A
Hood-latch bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
and the hood-latch
from the hood.
and the hood-latch bracket
The latch bracket must be against the
onto the hood-latch bracket
G402590
G402591
G402592
Page 3–16 Setup: Installing the Hood Latch