Torquing The Wheel Nuts; Adjusting The Traction Drive For Neutral - Toro Reelmaster 3100-D Operator's Manual

Torquing the Wheel Nuts

Torque the wheel nuts in a crossing pattern to 61 to 88 N∙m (45 to 65 ft-lb).
Failing to maintain proper torque of the wheel nuts could result in death or serious
injury.
Maintain proper torque of the wheel nuts.

Adjusting the Traction Drive for Neutral

If the machine moves when the traction pedal is in the neutral position, adjust the traction
cam.
1. Prepare the machine for maintenance.
2. Raise a front wheel and a rear wheel off the ground and place support blocks under the
frame.
If the machine is not supported adequately, it may accidentally fall, which could result
in death or serious injury.
Raise a front wheel and the rear wheel off the ground to prevent the machine from
moving during the adjustment.
3. Loosen the locknut
adjustment cam
3466-297A
WARNING
WARNING
on the traction
.
Page 6–23
G416234
Maintenance: Drive System Maintenance