Chapter 3: Setup; Installing The Wheels - Toro Reelmaster 3100-D Operator's Manual

Installing the Wheels

1
Parts Required
2
1
1. Mount a wheel assembly onto the wheel hub with the valve stem aligned outward.
Note:
2. Secure the wheel to the hub with the lug nuts, and torque the nuts in a crossing pattern
to 61 to 88 N∙m (45 to 65 ft-lb).
3. Repeat the procedure for the other wheel assemblies.
Setup
Front wheel assembly
Rear wheel assembly
The rear wheel is narrower than the front wheels.
Page 3–1
Chapter 3
Setup
3466-297 A