Checking the Coolant Level (continued)
Do not overfill the expansion tank.
5. Close and latch the hood.
Cleaning the Engine Cooling System
1. Prepare the machine for maintenance.
2. Unlatch and open the hood.
3. Clean the engine area thoroughly of all debris.
4. Remove the lower radiator shield
5. Clean both sides of the radiator
thoroughly with water or compressed air.
6. Install the lower radiator shield.
7. Close and latch the hood.
Brake Maintenance
Adjusting the Parking Brake
1. Prepare the machine for maintenance.
2. Loosen the setscrew
to the parking-brake lever
3. Rotate the knob until a force of 133 to 178 N
(30 to 40 lb) is required to actuate the lever.
4. Tighten the setscrew.
Maintenance: Cooling System Maintenance
IMPORTANT
.
area
securing the knob
.
Page 6–26
G416240
G416249
3466-297 A