Checking the Engine-Oil Level
Note:
Check the oil when the engine is cool. If the engine is warm, wait 10 minutes before
checking.
If the oil level is below the lower limit mark on the dipstick, add oil gradually until the level
reaches the upper limit mark on the dipstick.
Keep the engine-oil level between the upper and lower limits on the dipstick.
Overfilling or underfilling the engine oil may cause severe engine damage.
1. Prepare the machine for maintenance.
2. Open the hood.
3. Check the level of the engine oil.
4. Close and latch the hood.
Changing the Engine Oil and Filter
1. Prepare the machine for maintenance.
2. Unlatch and open the hood.
3. Perform the following steps to change the engine oil:
A. Remove either drain plug
engine.
B. Install the drain plug.
3466-297A
IMPORTANT
G453109
and allow all of the existing oil to drain out of the
Page 6–13
Maintenance: Engine Maintenance