Driving The Machine In Transport Mode - Toro Reelmaster 3100-D Operator's Manual

Driving the Machine in Transport Mode

1. Move the cutting-unit-drive switch to the
D
ISENGAGE
2. Raise the cutting units to the transport position.
3. Move the mow/transport slide
T
RANSPORT
Be careful when driving between objects so that you do not accidentally damage the
machine or the cutting units. Use extra care when operating the machine on slopes.
Drive slowly and avoid sharp turns on slopes to prevent rollovers.
Note:
You cannot lower the cutting units while operating the machine the transport mode.
3466-297A
position.
position.
left to the
G402852
IMPORTANT
Page 5–7 Operation: During Operation