Applying The Year Of Production Decal And Ce Decal; Applying The Ce Tilt Danger Decal; Installing The Tipper Roller Kit (Optional) - Toro Reelmaster 3100-D Operator's Manual

Applying the Year of Production Decal and CE Decal

1. Wipe the left frame, near the model/serial plate
, with alcohol and allow the frame to dry.
2. Remove the backing and apply the Year of
Production decal
serial plate.
3. Wipe the left frame, near the hood lock
alcohol and allow the frame to dry.
4. Remove the backing and apply the CE decal
to the frame.

Applying the CE Tilt Danger Decal

1. Wipe the tilt decal on the slope indicator
with alcohol and allow the decal to dry.
2. Remove the backing and apply the CE tilt
danger decal

Installing the Tipper Roller Kit (Optional)

15
Parts Required
1
When cutting in higher heights of cut, install the Tipper Roller Kit.
1. Raise the cutting units.
3466-297A
to the frame near the
as shown.
Tipper roller kit (not included)
G411007
, with
G402596
G402597
Page 3–18 Setup: Installing the CE Decals