Fayat Group DYNAPAC CA4600 Instruction Manual page 54

Fig. Status screen
Fig. Status screen with "DailyCheck"
Fig. Main screen/Working screen
Fig. Main screen/Working screen with
menu selection buttons (1)
42
The status image provides information on the fuel
level, urea level, machine hours and voltage level.
Fuel and urea levels are specified in per cent (%).
This screen is active until the Diesel engine is started
or an active screen choice is made via the function
buttons below the display.
If the engine is started before any active screen choice
is made the display will switch over to main screen.
This screen gives an overview and is kept during work:
- The speed is shown in the middle of the display.
(km/h or mph)
- Engine speed, vibration frequency (optional), CMV
value for compaction meter (optional) and slope as a
% (optional) are shown in the corners.
A menu field is shown by pressing one of the menu
select buttons. The field is visible for a short while, if
no selection is made the field fades out. Menu field will
appear again upon pressing either one of the selection
buttons (1).
1
4812163801.pdf
Machine description
2019-04-30