Table of Contents
Advertisement
1
Fig. Level control - differential housing
1. Level plugs (x 3)
2. Filler plug
1
Fig. Level check - planetary gear
1. Level/Filler plug
134
Rear axle differential - Check oil level
Wipe clean and remove the level plugs (1) and check
that the oil level reaches the lower edge of the plug
holes. The plugs can be found at the front or rear of
the rear axle.
At a low level, remove the filler plug (2) and top up
2
with oil to the correct level. Use transmission oil, see
lubricant specifications.
Clean and refit the plug.
1
Rear axle planetary gears - Check oil level
Position the roller so that the level plug (1) in the
planetary gear is at "9 o'clock" or "3 o'clock".
Wipe clean and remove the level plug (1) and check
that the oil level reaches the lower edge of the plug
hole. Top off with oil to the right level if the level is low.
Use transmission oil. See lubrication specification.
Clean and refit the plug.
Check the fluid level in the same way on the rear
axle's other planetary gear.
4812163801.pdf
Maintenance measures - 500 h
Never work under the roller when the engine is
Never work under the roller when the engine is
running. Park on a level surface. Block the wheels
running. Park on a level surface. Block the wheels
securely.
securely.
2019-04-30
Advertisement
Table of Contents
