Machine With Speed Limiter (Speed Potentiometer) - Optional - Fayat Group DYNAPAC CA4600 Instruction Manual

Fig. The display shows the selection in
the middle (tortoise, drum spin, wheelspin
or hare).
Fig. Control panel
1. Potentiometer (speed limiter)
2. Forward/Reverse lever
2019-04-30
The machine's gear position is shown in the center of
the speedometer; select the gear/speed for the task.
The machine does not need to be stopped to change
gear position.
Example is CA2500D, TC - Limited Slip Rear Axle (for other
alternatives see table in section for Technical data)
Carefully move the forward/reverse lever (2) forwards
or backwards, depending on which direction of travel
is required.
The speed increases as the lever is moved away from
the neutral position.
2
Machine with speed limiter (speed potentiometer) -
Optional.
1
Set the potentiometer (1) for variable speed setting in
the required mode.
The machine's gear position is shown in the center of
the speedometer. Select the gear/speed for the task.
4812163801.pdf
= Rabbit (4) = Rabbit (4)
= Drum spin (2) = Drum spin (2)
= Wheel spin (3) = Wheel spin (3)
= Turtoise (1) = Turtoise (1)
Operation
Max. speed Max. speed
11,5 km/h 11,5 km/h 7 mph 7 mph
8 km/h 8 km/h 5 mph 5 mph
7,5 km/h 7,5 km/h 4.5 mph 4.5 mph
5,5 km/h 5,5 km/h 3.5 mph 3.5 mph
75