Rear Axle Planetary Gear - Oil Change - Fayat Group DYNAPAC CA4600 Instruction Manual

1
Fig. Planetary gear/drainage position
1. Plug
1
Fig. Planetary gear/filling position
1. Plug
156

Rear axle planetary gear - Oil change

Position the roller with the plug (1) at its lowest
position.
Wipe clean, unscrew the plug (1) and drain the oil into
a suitable receptacle. The volume is approximately
1.85 liters (1.95 qts).
Oil should be taken to your local waste disposal Oil should be taken to your local waste disposal
station. station.
Position the roller so that the plug (1) in the planetary
gear is at "9 o'clock" or "3 o'clock".
Fill with oil to lower edge of level hole. Use
transmission oil. See the lubrication specification.
Clean and refit the plug.
Check the fluid level in the same way on the rear
axle's other planetary gear.
4812163801.pdf
Maintenance - 2000h
2019-04-30