Fayat Group DYNAPAC CA4600 Instruction Manual page 51

No No Designation Designation
12 12 Automatic vibration control (AVC) Automatic vibration control (AVC)
13 13 Adjustable frequency On/Off Adjustable frequency On/Off
(Optional) (Optional)
14 14 Working mode / Transport mode Working mode / Transport mode
15 15 Reserve Reserve
16 16 Strike-off blade On/Off (Optional) Strike-off blade On/Off (Optional)
17 17 Reserve Reserve
18 18 Frequency, increase (Optional) Frequency, increase (Optional)
19 19 Frequency, decrease (Optional) Frequency, decrease (Optional)
20 20 Working lights (Optional) Working lights (Optional)
21 21 Horn Horn
22 22 Emergency stop Emergency stop
23 23 Speed limiter Speed limiter
24 24 Rpm switch, diesel engine Rpm switch, diesel engine
25 25 Parking brake Parking brake
2019-04-30
Symbol Symbol Function Function
When activated, the vibration is switched on When activated, the vibration is switched on
automatically when the roller's speed is ≥ 1.8 km/h automatically when the roller's speed is ≥ 1.8 km/h
(1.1 mph) and disengaged at a speed of 1.5 km/h (0.9 (1.1 mph) and disengaged at a speed of 1.5 km/h (0.9
mph). mph).
Activates adjustable frequency, see also buttons 18 Activates adjustable frequency, see also buttons 18
and 19. and 19.
Deactivated (LED off) produces fixed set vibration Deactivated (LED off) produces fixed set vibration
frequencies for the machine. frequencies for the machine.
Activates working mode, which makes it possible to Activates working mode, which makes it possible to
use vibration and lower the strike-off blade (optional). use vibration and lower the strike-off blade (optional).
The roller always starts in transport mode. The roller always starts in transport mode.
Activates the strike-off blade and its functions, also Activates the strike-off blade and its functions, also
requires working mode (14) to be activated. requires working mode (14) to be activated.
Increases vibration frequency Increases vibration frequency
Decreases vibration frequency Decreases vibration frequency
By activating the working lights will turn ON. By activating the working lights will turn ON.
Press to sound the horn. Press to sound the horn.
Brakes the roller and switches off the engine. The Brakes the roller and switches off the engine. The
power supply goes off. power supply goes off.
NB! When starting the machine, the emergency stop NB! When starting the machine, the emergency stop
must be inactive. must be inactive.
Limitation of the machine's max. speed (max.speed is Limitation of the machine's max. speed (max.speed is
obtained with full deflection of the F/R lever). Set the obtained with full deflection of the F/R lever). Set the
knob to the position for the desired max. speed. knob to the position for the desired max. speed.
Three-position switch for idling (LO), intermediate Three-position switch for idling (LO), intermediate
speed (MID) and working speed (HI). speed (MID) and working speed (HI).
NOTE:The lever must be in neutral (LO) when starting NOTE:The lever must be in neutral (LO) when starting
the machine. The engine also runs at low speed when the machine. The engine also runs at low speed when
stationary, more than approx. 10 seconds if the F&R stationary, more than approx. 10 seconds if the F&R
lever is in neutral. lever is in neutral.
If the F&R lever is moved out of neutral the speed will If the F&R lever is moved out of neutral the speed will
increase to the set speed again. If the machine has a increase to the set speed again. If the machine has a
fuel optimization system, MID is replaced by ECO (and fuel optimization system, MID is replaced by ECO (and
the switch is green). the switch is green).
To activate the brakes, press the top of the switch to To activate the brakes, press the top of the switch to
change the position of the switch. change the position of the switch.
To release the brakes, press down the red part at the To release the brakes, press down the red part at the
same time as the switch and change the position of same time as the switch and change the position of
the switch. the switch.
NOTE:When starting the machine, the parking brake NOTE:When starting the machine, the parking brake
must be activated. must be activated.
4812163801.pdf
Machine description
39