3.3
Residual risks
Phase
Activity
Loading and unloading
with forklift truck
Deposit at the installation
site
Incorporate into on-site
Transport and
table unit
assembly
Install freestanding ma-
chine
Install electrical connec-
tions
Install separate GiO
MODULE (optional)
Fill with
detergent/rinse aid
Commissioning
Activities in the machine
Filling/heating
Programme is running
Loading and unloading
the machine
Operation
Other activities
Normal operation
Refilling detergent/rinse
aid
9760413
Nature of the hazard
Crushing/impact
Crushing/impact
Shearing
Crushing
Electric shock
Tripping/falling/crushing
Eye injury/health risks
Hand injuries on sharp
edges
Contact with hot water
Trapping of hand
Broken crockery causing
cuts/severing
Risk of snagging with
loose clothing or items of
jewellery
Slipping
Contact with hot water
Swallowing of water in the
wash chamber
Substandard wash perfor-
mance due to failure of
dosing units
Eye injury/health risks
Avoidance measure
•
Load-bearing capacity of the forklift truck must
be adequate for the weight of the machine
•
Please note the machine's centre of gravity
•
Secure to prevent slipping
•
Ensure that the ground beneath is capable of
taking the load
•
Ensure that the machine cannot tip
•
Ensure that no shear points are created be-
tween the hood and the table
•
Ensure that the freestanding machine is se-
cured to prevent it from tipping backwards
•
Adhere to the accident prevention regulations
•
We recommend fastening the GiO MODULE to
the wall/table/machine
•
Mount freestanding module using solid base
•
If needed, run module at 90 degrees (lying)
•
Wear safety eyewear/gloves
•
Avoid contact with skin and eyes
•
Wear protective gloves
•
Do not set machine in operation without tank
cover sieve
•
Do not open hood during cycle
•
To close the hood, use the handle designated
for this purpose
•
Wash/clean washware in the specially de-
signed rack in the machine
•
Place small items in the appropriate rack in-
serts
•
Washware must not come into contact with ro-
tating parts of the machine
•
Wear suitable work clothing and sturdy shoes
•
Do not wear rings, necklaces or other pieces of
jewellery
•
Use non-slip floor coverings
•
If necessary, allow washware to cool down
•
If necessary, allow machine components to
cool down before touching
•
Do not remove tank cover sieve while appli-
ance is in operation
•
Protective gloves recommended
•
Only ever use the hood handle or handles to
open/close the hood
•
Do not use the water in the wash chamber for
food preparation or drink it
•
Monitor wash performance
•
If appropriate, repeat the programme
•
Wear safety eyewear/gloves
•
Avoid contact with skin and eyes
9 / 56