Meiko UPster H 500 M2 Original Operating Instructions page 50

Hood type dishwashing machine
Hide thumbs Also See for UPster H 500 M2:
Table of Contents

Advertisement

9.6
Spare parts
10
Non-use for several days
10.1 Break in operation (e.g. seasonal operation)
10.2 Commissioning after break in operation
11
Dismantling and disposal
50 / 56
Please provide the following information on any query and/or when ordering spare
parts:
..............................................................
Type:
..............................................................
SN:
..............................................................
(This information can be found on the type plate, see page 15.)
Run self-cleaning programme and clean the machine, see page 33.
Close the on-site shut-off valve.
Switch off on-site mains isolator.
Manually open a gap in the front door or hood to prevent germ formation and
odours.
Frost protection: If necessary, have the machine frost-proofed by the authorised
service technician. Dishwashing machines of the M-iClean U series without GiO
MODULE can be frost-proofed by yourself.
Set up the machine for 24 h at 25°C if it is not frost-free. Have an authorised
service technician commission the machine again.
Have reverse osmosis (GiO MODULE) (option) disinfected in the case of down-
times of more than 6 months.
Open the on-site shut-off valve and switch on the main switch.
Put machine into operation, see page 27.
In addition to valuable raw materials and recyclable materials, the packaging and the
old appliance may also contain substances that are harmful to health and the envi-
ronment and were required for the function and safety of the old appliance.
9760413

Advertisement

Table of Contents
loading

This manual is also suitable for:

M004dwht10m2-20

Table of Contents